What does the Indesit F01 error code mean?
On Indesit dishwashers, F01 typically indicates a water inlet or door detection fault. The machine cannot begin a cycle because it either cannot confirm the door is properly closed, or it has failed to detect water entering. Indesit and Hotpoint share the same platform, so the cause and fix are similar across both brands.
🔍 Symptoms
- Machine will not start any programme
- Door appears closed but machine acts as if it is open
- Machine starts then immediately stops
- No water can be heard entering the machine
- Programme indicator light flashes once repeatedly
How to fix the Indesit F01 error code
- Check the door is firmly closed — push it until you hear a click. Overloaded machines can prevent the door from fully closing.
- Inspect the door latch mechanism on the door itself for any signs of physical damage or misalignment.
- Check the water supply tap is fully on and the inlet hose is not kinked.
- Clean the inlet hose mesh filter.
- If the door latch is physically fine but the machine still cannot detect closure, the door interlock switch/microswitch is likely faulty and requires replacement.
Frequently Asked Questions (FAQ)
Q: My Indesit dishwasher door clicks shut but F01 still shows — is the latch broken?
A: The physical latch can be intact while the electrical microswitch inside the latch assembly has failed. The control board detects door closure electrically, not mechanically.
Q: Is F01 on an Indesit dishwasher the same as on an Indesit washing machine?
A: The codes share the same numbering but refer to different faults on dishwashers versus washing machines. Always consult a dishwasher-specific guide for dishwasher repairs.
Q: How do I reset the F01 error on an Indesit dishwasher?
A: Fix the underlying cause first, then hold the programme button for 3 seconds, or switch off at the wall for 1 minute.
Affiliate disclosure: This page contains affiliate links. We may earn a small commission if you buy through them, at no extra cost to you.