AEG E10 Error Code — What It Means & How To Fix It

⚠️

For information purposes only. Always consult a qualified engineer before attempting repairs. 🔌 Unplug your appliance before any inspection or repair.

What does the AEG E10 error code mean?

Water supply to the machine is not sufficient.

How to fix the Miele AEG E10 error code

Check water tap is fully open
Inspect hose for kinks
Clean inlet filter mesh
Check household water supply

The majority of the time these are external or simple faults not components.

Frequently Asked Questions

Why is my AEG washer not filling?
Blocked filter or low water pressure.

Is E10 easy to fix?
Yes — usually a quick DIY job.

ℹ️ Affiliate disclosure: This page contains affiliate links. We may earn a small commission if you buy through them, at no extra cost to you.

🎯 What is likely causing this fault?

🧹

Inlet Valve / Filter Blockage 40%

💧

Low Pressure / Supply Issue 25%

📡

Pressure Switch / Level Sensor 20%

💡

Wiring / PCB 15%

⚠️ Estimates based on common faults — not a guaranteed diagnosis. Always verify before ordering parts.

🔩

Parts you may need

Enter your model number to filter results to your exact machine

Your model number

Usually found on a label inside the door frame or on the back panel of the machine.

○ No model entered

Part	Approx. UK Cost	Find it
Water Inlet Valve model filtered	£15 - £35	🛒 Amazon UK →
Water Inlet Valve model filtered	£15 - £35	🏷️ eBay UK →

ℹ️ Prices are approximate. Always check the part number matches your model before ordering. Not sure of your model number? Find out how to locate it here.

🇬🇧 UK — Parts & Replacements