What does the Whirlpool F2 error code mean?
F2 (sometimes displayed as F02) on a Whirlpool dishwasher indicates a drainage failure. The machine has been unable to remove waste water within the allotted time. This is a very common fault and is usually resolved by clearing the filter and pump.ce.
🔍 Symptoms
- Water in the bottom of the dishwasher after a cycle
- Machine stops mid-programme
- Drain pump hums but produces no water movement
- Dishes dirty and wet
- Error appears consistently at the end of every programme
How to fix the Whirlpool F2 error code
- Clean the filter assembly completely.
- Remove standing water and inspect the pump impeller housing for blockages.
- Check the drain hose at the rear for kinks.
- Check the connection to the sink waste — ensure no blanking plug is still in place.
- If the filter and hose are clear, run the machine and listen to the pump. Replace the pump motor if it hums without output.
Frequently Asked Questions (FAQ)
Q: How do I find the filter on a Whirlpool dishwasher?
A: Open the door and pull out the lower basket. The filter is in the centre of the machine base — a cylindrical mesh that unscrews anti-clockwise to remove.
Q: My Whirlpool dishwasher shows F2 only on the long eco programme — is this normal?
A: No. Eco programmes use less water per cycle, so if drainage is even slightly compromised, the eco programme may fail first. A full investigation of the filter and drain path is still recommended.
Q: Can a full kitchen sink cause F2?
A: Not the bin itself, but a blocked kitchen waste pipe — which the dishwasher drain hose connects to — will prevent the machine from draining and cause F2.
🔧 Parts You May Need
| Part | Approx. UK Cost |
| Drain Pump Motor | £20–£50 |
Affiliate disclosure: This page contains affiliate links. We may earn a small commission if you buy through them, at no extra cost to you.