What this error means
Water inlet fault
The E29 error indicates a problem with water entering the machine, usually caused by low water pressure, a blocked inlet filter, or a faulty inlet valve.
What you'll need first
Affiliate links — we may earn a small commission at no extra cost to you.
Step-by-step
Symptoms to look for
- No water entering machine
- Cycle stops early
- Long fill times
How to fix it
Always unplug the appliance before inspecting water inlet components
Ensure the mains water tap is fully open and water is flowing at normal pressure
Check for bends, twists, or trapped hose sections behind the machine
Turn off water supply, remove inlet hose, and carefully clean mesh filters at both ends using a soft brush
Listen for clicking when cycle starts; no sound may indicate faulty valve
Reconnect hose, restore water and power, and run a short cycle to confirm correct filling
When to call an engineer
- Error persists after cleaning
- No water flow at all
- Valve not responding
Frequently asked questions
What causes E29?
Can I fix it myself?
Why is no water entering?
🎯 What is likely causing this fault?
⚠️ Estimates based on common faults — not a guaranteed diagnosis. Always verify before ordering parts.
Parts you may need
Enter your model number to filter results to your exact machine
Usually found on a label inside the door frame or on the back panel of the machine.
| Part | Approx. UK Cost | Find it |
|---|---|---|
| Inlet Valve | £15 - £25 | 🏷️ eBay UK → |
| Inlet Valve | £15 - £30 | 🛒 Amazon UK → |
ℹ️ Prices are approximate. Always check the part number matches your model before ordering. Not sure of your model number? Find out how to locate it here.