What does the Beko E02error code mean?
E2 is Beko’s dishwasher drainage fault code. The machine has been unable to expel the waste water within the required time. The causes are typical of dishwasher drain faults: a blocked filter, a jammed or failed pump, or an obstruction in the drain hose.
🔍 Symptoms
- Standing water remaining in the dishwasher after a cycle
- Machine halts mid-programme at the drain phase
- Drain pump motor runs but no water is expelled
- Dishes come out dirty and wet
- Error appears consistently on every wash
How to fix the Beko E02 error code
- Remove lower basket and clean the filter assembly thoroughly.
- Remove as much standing water as possible and check the pump impeller for debris.
- Inspect and straighten the drain hose.
- Check the connection to the sink waste pipe for blockages.
- Test the drain pump motor with a multimeter if the above steps do not resolve the issue.
Frequently Asked Questions (FAQ)
Q: How often should I clean my Beko dishwasher filter to avoid E02?
A: Once a month as a routine. If you wash heavily soiled dishes without pre-rinsing, clean it fortnightly.
Q: My Beko dishwasher makes a noise when draining but E02 still shows — what is that noise?
A: A humming or rattling sound with no water movement means the pump impeller is jammed. The motor is running but the blades cannot spin — clear the obstruction from the pump housing.
Q: Can E02 cause any damage to my Beko dishwasher?
A: Yes. Running the drain pump continuously against a blockage will overheat and burn out the motor. Address E02 promptly to avoid a more expensive repair.
Affiliate disclosure: This page contains affiliate links. We may earn a small commission if you buy through them, at no extra cost to you.