What does the AEG E20 error code mean?
The E20 (or C2) error indicates that your washing machine cannot drain water properly. This usually means there is a blockage somewhere in the drainage system, such as the filter, pump, or hose. If left unresolved, water will remain in the drum and the cycle will not complete.
How to fix the Miele AEG E20 error code
- Cancel the cycle and try a drain or spin programme
- Open the bottom panel and unscrew the pump filter
- Remove debris such as coins, lint, or hairpins
- Check the pump impeller spins freely
- Inspect the drain hose for kinks or blockages
- Check the sink waste connection (U-bend)
💡 Pro tip: This is one of the most common faults — 90% of cases are simple blockages.
Frequently Asked Questions
Why is my AEG washing machine not draining?
Most commonly due to a blocked pump filter or drain hose.
Can I fix AEG E20 myself?
Yes — it’s usually a simple DIY job.
Is it safe to use with E20 error?
No — water may remain in the drum and cause further issues.
How do I reset AEG E20 error?
Unplug the machine for 10–15 minutes after clearing the blockage.
Affiliate disclosure: This page contains affiliate links. We may earn a small commission if you buy through them, at no extra cost to you.