What does the Hotpoint F01 error code mean?
F01 points to a fault on the main PCB (Printed Circuit Board) — the electronic brain of the machine. This can be caused by a power surge, moisture getting into the board, a failed component, or general age-related failure. It is one of the more serious fault codes as it may mean the machine needs a new control board.
How to fix the Hotpoint F01 error code
- Unplug the machine for at least 10 minutes to allow a full electronic reset, then try again — transient faults sometimes clear this way.
- Check your home’s electrics: has anything tripped? Is the socket working normally?
- If the error persists, remove the top panel (usually two screws at the back) and inspect the PCB visually for burn marks, blown components, or signs of moisture damage.
- A second-hand or refurbished PCB for your specific model can often be found on eBay for £30–70, significantly cheaper than a new one.
- If the machine is under 3 years old, contact Hotpoint UK — this type of fault may be covered under warranty or their extended cover scheme.
Affiliate disclosure: This page contains affiliate links. We may earn a small commission if you buy through them, at no extra cost to you.